ZEBRA CONFIDENTIAL: INTERNAL USE ONLY ZEBRA TECHNOLOGIES 3
9. VC Control Panels Software Package rev. 5.0.44201.0 (Windows 7) or rev. 5.1.44316.0
(Windows 10).
The Package includes:
a. Embedded Controller and Accelerometer sensor drivers;
b. Configuration User Interface for all VC-specific features;
c. Unattended installation command line:
• First time installation: “VCControlPanel_setup.exe /s /l=<fullPathLogFile>”;
• Update: “VCControlPanel_setup.exe /s /l=<fullPathLogFile> REPAIR=TRUE”;
10. Reboot
Optional drivers (if the SKU supports the hardware or for printer support):
1. Ethernet Interface - Realtek Gigabit Ethernet driver rev. 10.13.1223.2016 or later;
• Windows 7 - Realtek_GBE_Win7_7092_08242015.zip
• Windows 10 - VC80 Ethernet Driver Win10_INF.zip
2. GPS Interface:
• U-Blox sensor driver – (filename -
GPS_UBloxGnss_sensorDeviceDriver_windows_3264_v2.24.exe)
• - U-Blox Sensor and Virtual COM port Driver rev. 2.24 (out-of-box Windows 10 Enterprise
driver);
3. CAN Bus Interface:
• - CAN Bus jCOM1939 Monitor and Simulation utility rev. 1.02;
• VCOM port driver:
i. If this driver is missing, Device Manager > Other Devices - will display an ! for an
unknown VCOM device.
ii. Driver needs to be added manually with Windows “Update Driver Software”
(driver is located in the “VCOM_Driver_Windows7.zip” file).
Optional Zebra software:
1. Zebra Scanner SDK rev. 3.00.0004;
2. Zebra CoreScanner Driver rev. 3.00.0003;
3. Zebra SMS rev. 3.00.0004;
a. Configure SMS Service to “Manual” Startup type;
4. Zebra Printer Setup Utilities rev. 1.1.9.1204;
5. Zebra Font Downloader rev. 3.1.1.9355;
6. Zebra Designer Pro 2 rev. 2.50.9385;
7. Zebra Printer Status Monitor rev. 5.1.7;
8. Zebra Firmware Downloader rev. 3.0.1.28;