Zebra Z4M - Page 60

52 Zebra Z4M/Z6M Printers User’s Guide
Display Shows Action/Explanation
WEB S.
MEDIA S.
RIBBON S.
TAKE LABEL S.
MEDIA LED
RIBBON LED
These parameters are automatically set during the calibration procedure. They
should only be changed by a qualified service technician. Refer to the
maintenance manual for more information on these parameters.
Press the SELECT key repeatedly to skip these parameters.
LCD ADJUST
LCD Display Adjustment: Press the DECREMENT (–) key to decrease the
value (reduce brightness), press the INCREMENT (+) key to increase the value
(increase brightness).
Range: 00 to 19
This parameter allows you to adjust the brightness of your display if your display
is difficult to read.
FORMAT CONVERT
Format Convert: Press the INCREMENT (+) or DECREMENT (–) key to
display other choices.
Default: None
Selections: None, 150
V 300, 150 V 600, 200 V 600, 300 V 600
Selects the bitmap scaling factor. The first number is the original dots per inch
(dpi) value; the second is the dpi to which you would like to scale.
PASSWORD LEVEL
Password Level: Press the INCREMENT (+) or DECREMENT (–) key to
display other choices.
Default: Selected items
Selections: Selected items, all items
This parameter allows you to select whether certain Zebra-selected menu items
(”selected items”) or all menu items (”all items”) are password protected.