22
Troubleshooting: Card Jam
Card Jam
Step 1. Open the top cover, and remove the ribbon.
Step 2. A card can become jammed in one of several positions: at the rear of the printer in the card
ipper; along the print path toward the rear, middle, or front; or protruding slightly from the exit
slot. In any case the procedure is the same.
Step 3. Locate the green manual (arrow below) advance wheel on the inside of the printer; it is located
toward the rear on the left side.
Step 4. Turn the manual advance wheel clockwise until the card stops.
Step 5. Carefully remove the card.
To Next Page
Loading...