Need help?Do you have a question about the Zebra Net and is the answer not in the manual?
General| Brand | Zebra |
|---|---|
| Model | Net |
| Category | Print Server |
| Language | English |
Identifies users for whom this guide is intended.
Explains the structure and setup of the user guide.
Lists supported third-party wireless radio cards required for printer WLAN connectivity.
Details the various security and encryption types compatible with ZebraNet wireless print servers.
Outlines hardware and firmware requirements for using print servers with printers.
Provides detailed specifications for external, internal, and wireless print servers.
Provides illustrations and steps for installing the external ZebraNet 10/100 Print Server.
Details the process of installing wireless radio cards, including PCMCIA and Compact Flash types.
Lists the default User ID and Password required for accessing certain printer features.
Guides on printing a configuration label for the external print server to obtain network information.
Explains how to print network configuration labels for internal and wireless print servers.
Describes configuring wireless security via the ZebraNet Bridge Enterprise utility's Network Setup Wizard.
Explains how to set wireless security parameters using ZPL commands.
Explains how to interpret LCD indicators for link status and signal quality on compatible printers.
Describes the wireless status indicator lights specific to the HC100 printer model.
Explains how to view IP addresses and identify the active print server using network configuration labels.
Details how active print server selection depends on the printer model and installed print servers.
Explains how print servers obtain temporary IP addresses when the network uses DHCP.
Provides steps to assign an IP address from the printer's control panel or LCD.
Explains ZebraLink Alerts for notifying administrators of printer errors or warning conditions to reduce downtime.
Guides on checking print server configuration settings using the ZebraNet Bridge utility.
Provides steps to check print server configuration settings using the printer's web pages via a browser.
Details the steps to enable protocols using WebView by accessing the printer's IP address through a web browser.
Explains how to reset the print server to factory settings using the WebView interface.
Describes using ZebraNet Bridge to reset print servers to factory settings.
Explains BSD-style print queue setup, including configuring the /etc/printcap database.
Guides on configuring System V queues for ZebraNet printing on UNIX systems, including prerequisites and configuration steps.
Explains how to set up the print server to support Internet Printing Protocol (IPP) and provides the URL format.
Details how to use FTP to send information, such as ZPL scripts, to the printer.
Introduces WebView as a tool for controlling and monitoring the printing environment via a web browser.
Explains how to access and view accurate, up-to-the-minute printer configuration information.
Guides on accessing and modifying printer settings for ZebraLink-enabled printers, requiring default User ID and password.
Shows screens for Primary/Secondary settings within network communications setup.
Details SNMP setup for managing network devices, defining system name and location.
Explains SMTP setup for email alerts, allowing entry of system information.
Covers TCP/IP settings for various printer models, including IP address and network configuration.
Details wireless setup options, including signal strength and security configurations.
Outlines wireless encryption setup, covering WLAN security and password configurations.
Lists available buttons for file management operations like delete, copy, and run ZBI programs.
Provides steps to access the Directory Listing page to view file system devices and stored objects.
Describes basic printer functions accessible from the Printer Controls page, such as Feed, Cancel, and Reset.
Covers features specific to the print server, distinct from printer features, often requiring user ID and password.
Guides on accessing print server settings, based on ZPL printer navigation with firmware X.15 or above.
Explains how to access the print server configuration page and port status from the Print Server Status section.
Details how to reset print server configuration settings to their most recent previous state.
Guides on restoring the print server to its default factory settings.
Lists control panel menu options that appear when a print server is installed, varying by printer model.
Identifies wired network parameters available on the LCD for various Zebra printers with installed print servers.
Lists wireless network parameters available on the LCD for various Zebra printers with installed print servers.
Provides solutions for issues related to the external ZebraNet 10/100 Print Server, including status indicators and common problems.
Offers solutions for troubleshooting the internal ZebraNet 10/100 Print Server, covering status indicators and factory resets.
Addresses issues specific to wireless print servers, including 5GHz band operation and factory default resets.
Lists and resolves issues related to IP addresses, including default addresses and missing settings.
Presents a collection of frequently asked questions about Zebra's wired and wireless print servers.
To Next Page