Zebra Net User Manual

Using Printing Protocols
IPP
86
P1043301-005 11/21/13
IPP
Internet Printing Protocol (IPP) is an application-level protocol used for distributed printing
over the Internet. Using IPP from any standard IPP client, you can transfer jobs to a printer that
is connected to either your external ZebraNet 10/100 Print Server or your internal ZebraNet
10/100 Print Server for S4M, 105SL, PA X 4, and XiIIIPlus.
To set up your 10/100 Print Server to support IPP, complete these steps:
1. Open a browser.
2. Enter the 10/100 Print Server IPP URL as follows:
http://xxx.xxx.xxx.xxx:631/ipp/port1
xxx.xxx.xxx.xxx = the IP address of the 10/100 print server device
:631 = a fixed value
/ipp = a fixed string designating IPP
/port1 = a fixed value
Important • You must have IPP support on your system.
Important • IPP support is not available on all 10/100 Internal Print Server printers. To be
certain you are running the latest version of firmware, visit http://www.zebra.com.
Example • Your address might look like this:
http:198.60.248.120:631/ipp/port1

Zebra Net Specifications

General

Brand	Zebra
Model	Net
Category	Print Server
Language	English