Zebra Net User Manual

75
Getting Started
Defaulting ALL Print Servers
11/21/13 P1043301-005
Defaulting ALL Print Servers
Using WebView
To default the print server to factory settings using WebView, complete these
steps:
1. From the ZebraNet PrintServer view, click Factory Print Server Settings.
The Restore to Factory Defaults page opens:
Figure 21 • Restore to Factory Defaults
2. Enable the check box for the settings you want to reset, and click Submit Changes.
Important • During the reset cycle, the web pages are unavailable. Upon completion,
check the print server IP address as it may have changed during the reset cycle.

Zebra Net Specifications

General

Brand	Zebra
Model	Net
Category	Print Server
Language	English