Load Media and Transfer Ribbon
14
P1061739-002 ZD500 Quick Reference Guide 01/23/2014
3. Verify that the moveable blackline sensor is aligned in the center default position. This is
the standard operating position for media sensing. When the sensor is moved from the
default label web (gap) sensing area, the printer will only detect blackline, black mark and
die-cut notched media. See User’s Guide for more details on adjusting this sensor use
variation.
Printer Optional:
Moveable
Blackline Sensor
Off Center
Blackline Sensing Only
Default - Web (Gap) Sensing
Standard Operating Position
To Next Page
Loading...