Need help?Do you have a question about the Zebra ZD200 Series and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Speed | 4 in/s (102 mm/s) |
| Connectivity | USB |
| Media Length | 0.5-39 in (13-991 mm) |
| Media Sensors | Reflective |
| Programming Languages | ZPL |
| Storage Temperature | -40°F to 140°F (-40°C to 60°C) |
| Maximum Media Roll Size | 1.5 in (38 mm) core |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
Provides an overview of the printer's physical hardware setup process for printing the first label.
Detailed instructions for loading thermal transfer roll ribbon and media into the printer.
Covers SmartCal media calibration and setting media sensing for optimal operation.
Explains various interface options (USB, Ethernet, Wi-Fi) for connecting the printer to a computer.
Step-by-step instructions for setting up printer communication with Windows operating systems.
Guidance on adjusting print quality through darkness, speed, and print width settings.
Explains printer operation modes like Tear Off, Peel, and Cutter options.
Information on printer fonts, code pages, and language localization support.
Details on installing and using media roll adapters for different media sizes.
Provides guidelines for routine cleaning of the printhead, media path, and other printer components.
Instructions on how to update the printer's firmware using Zebra Setup Utilities.
Troubleshooting common problems related to print quality, such as fuzzy images or smudges.
Procedures for resolving common alerts like Media Out, Ribbon Out, and Printhead temperature issues.
Steps to diagnose and troubleshoot data transfer problems between the printer and computer.
To Next Page