Zebra ZD200 Series

50
Setup for Windows
®
OS
The section helps you setup communications between your printer and the Windows operating system
environment.
Windows to Printer Communication Setup (Overview)
For supported Windows Operating systems (most common) with a Local (wired) connection:
1. Download the Zebra Setup Utilities from the Zebra web site.
• ZD200 Series Thermal Transfer Printer — www.zebra.com/zd200t-info
2. Run’ the Zebra Setup Utilities from your Download directory.
3. Click on ‘Install New Printer’ and run the install wizard.
4. Select ‘Install Printer’.and select your printer’s model number from the list of ZDesigner printers.
5. Select the USB port and connect to the PC. Use the USB interfaces to assist Wizard guided
installation of networked or Bluetooth Classic (4.0).
6. Turn the printer ON and configure printer communications for your interface type.
7. Use the Windows driver to print a ‘Test Print’ to verify operation with Windows.