Zebra ZD200 Series

9
Introduction
This section introduces the Zebra® ZD200 4-inch desktop thermal transfer label printers. The overview
includes the printer’s features and options, and what ships with your new printer.
This document covers the following ZD-series desktop printer models: ZD220 and ZD230
• ZD200 Series Thermal Transfer Printer — www.zebra.com/zd200t-info
4-inch Desktop Thermal Printers
The Zebra® 4-inch Desktop printers are compact label printers with essential features and options.
The ZD200 Series thermal transfer printers can support:
• Printing speeds up to 152.4 mm/s (6 ips - inches per second) at 203 dpi (dots per inch print density).
• ZPL ™ and EPL Zebra printer programming languages.
Common Desktop Printer Features:
• OpenAccess ™ design for simplified media loading.
• Color-coded “touch points” for operator controls and media guides.
• Simple single control button and single multi colored status indicator.
• Zebra’s printer operating system — an open platform with software tools needed to integrate,
manage, and maintain the printer.
• Media roll support:
• Outer Diameter (O.D.): Up to 127 mm (5 inch) and
• Inner Diameter (I.D.) roll cores:12.7 mm (0.5 inch), 25.4 mm (1 inch), and an optional
1.5 inch (38.1 mm) media core adapter set.
• Half width Movable Media Sensor provides compatibility with a wide range of media types:
• Compatible with full or partial width black mark media - center to left side of media.
• Compatible with notched or slotted media - center to left side of media.
• Center position transmissivity sensor for use with label gap/web media.
• On–the–fly OpenType and TrueType font scaling and import, Unicode, resident scalable font (Swiss
721 Latin 1 font), and a selection of resident bitmap fonts.