Zebra ZD500 series - Page 23

11
Introduction
Printer Control Panel Display
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
Printer Control Panel Display
The printer’s control panel includes a display, where you can view the printer’s status or
change its operating parameters. In this section, you will learn how to navigate through the
printer’s menu system and change values for menu items.
After the printer completes the power-up sequence, it moves to the Idle Display (Figure 6).
If a print server is installed, the printer cycles through the information shown and the
printer’s IP address.
Figure 6 • Idle Display
The printer’s operating parameters are organized into several user menus, which you can
access through the printer’s Home menu (Figure 7). For detailed information about
changing the printer settings, see Printer Configuration on page 51.
Figure 7 • Home Menu
1
The printer’s current status
2
Information that you set through TOOLS Menu on page 56 - IDLE DISPLAY
Home menu shortcut
See SETTINGS Menu on page 52.See LANGUAGE Menu
on page 69.
See TOOLS Menu on page 56.See SENSOR Menu on page 71.
See NETWORK Menu
on page 61.
See PORTS Menu on page 72.
See RFID Menu on page 65 See BLUETOOTH Menu
on page 74
Exit and return to the Idle Display
(Figure 6).
PRINTER READY
V74.19.1Z
1
2
SETTINGS