29
Setup
Connecting your Printer to a Computer
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
USB Interface
Universal Serial Bus (version 2.0 compliant) provides a fast interface that is compatible with
your existing PC hardware. USB’s “plug and play” design makes installation easy. Multiple
printers can share a single USB port/hub.
When using a USB cable (not supplied with your printer), verify that the cable or cable
packaging bears the “Certified USB™” mark (see below) to guarantee USB 2.0 compliance.
.
Parallel Interface
The required cable must have a 25 pin “D” type (DB-25P) male connector on one and a
Centronics on the other end (IEEE 1284 A-B parallel interface specification).
To Next Page
Loading...