Zebra ZD500 series - Page 47

35
Setup
Configure Using the Connectivity Wizard
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
4. From the Choose Port list, select the port to which your printer is connected.
• If you will save the file without sending it to the printer, you may select any available
port.
• If you select File:, you will be asked to browse to the location of the file you want to
save.
• If you select a serial port, the serial configuration information appears below the
Choose Port list. If necessary, change the serial communication settings to match your
printer’s settings.
5. Click Next.
The wizard prompts for the print server device to configure.
6. Select Wireless and then click Next.
The wizard prompts you for the type of printer you are using.
Note • If a port is in use by another device, it will not be included in the drop-down
list.