81
Print Operations
Media Loading
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
Media Loading
Use the 3 inch Core Adapters for media mounted on a 3 inch I.D. (Inner Diameter) rolls. The
maximum outside diameter of the roll is 5 inches.
Attaching the 3 inch Core Adapters
1. Open the printer.
2. Open the media roll holder. For easier access, the media guide stop adjustment can be
turned toward the front of the printer to lock open the media roll holders for easier access
to those roll holders.
3. Snap the core adapters onto the media roll holders. The hole on the adapter align with the
roll holder roll mount. the extended part of the adapter goes under the media guide in the
front of the media roll holder.
To Next Page
Loading...