5. Close the printer cover. Connect the power cord to the printer first and then to the power source (e.g.,
wall outlet). Ensure that the labels are installed correctly.
NOTE: You can obtain additional labels for the thermal printer by utilizing the Order Supplies Online
application on fedex.com or by calling 1.800.GoFedEx 1.800.463.3339. Label part numbers are
preprinted on labels in purple or orange ink. FedEx Ship Manager Software supports several
part numbers. FedEx Ship Manager at fedex.com supports only non-doc-tab labels (item #
156297-435).
3 Turn off your computer and the printer before connecting the supplied
USB cable to a dedicated USB port on the printer. Be sure to thread the
USB cable through the strain relief clip before connecting it to the
printer. Then connect the USB cable from the printer to a dedicated USB
port on the computer.
To Next Page
Loading...