Need help?Do you have a question about the Zebra ZP 500 and is the answer not in the manual?
General| Resolution | 203 dpi (8 dots/mm) |
|---|---|
| Print Method | Direct Thermal |
| Maximum Print Width | 4.09 inches (104 mm) |
| Memory | 8 MB SDRAM |
| Connectivity | USB |
| Maximum Print Length | 39 inches (991 mm) |
| Media Width | 19 to 110 mm |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
Lists and describes all items included in the ZP 500 Plus thermal printer kit.
Detailed steps for correctly opening the printer and loading the thermal label roll.
Instructions for connecting the ZP 500 Plus printer to your computer via USB.
Instruction to power on the computer after the printer connection is made.
Procedure to uninstall previous Zebra printer drivers before installing the new one.
Step-by-step guide to install the ZP 500 thermal printer driver from the CD.
Continues the process of installing the printer driver, including hardware wizard steps.
Instructions for printing a test label to verify correct driver installation.
Steps to set up the ZP 500 Plus printer within FedEx Ship Manager at fedex.com.
Steps to configure the ZP 500 Plus printer for FedEx Ship Manager Software.
Instructions to set the ZP 500 Plus as the default printer and perform a final test.
To Next Page