10. Turn on the printer. The printer starts the auto-calibration process and feeds out one or more labels.
After the printer completes the auto-calibration process, remove these excess labels. The Welcome to
the Found New Hardware Wizard screen displays.
11. Click the Install from a list or specific location (Advanced) radio button.
12. Click Next. The Hardware Type screen displays.
13. Scroll down the list and select Printers.
NOTE: If the Hardware Type screen does not display, continue on with the next step.
14. Click Next. The Please Choose Your Search and Installation Options screen displays.
NOTE: If the Hardware Type screen does not display, the Please Choose Your Search and Installation
Options screen automatically displays.
15. Click the Search for the best driver in these locations radio button. Also select the Include this location
in the search checkbox.
16. Click Browse to navigate to the designated directory where you saved the printer driver files. The
default directory is C:\ZUD4233. Click OK.
17. Click Next. The Completing the Found New Hardware Wizard screen displays.
NOTE: If the Windows Logo testing message displays, click Continue Anyway. The Completing the
Found New Hardware Wizard screen displays.
18. Click Finish. Close the Zebra Printers for FedEx Shipping Applications screen and remove the Zebra ZP
500 Plus and Z4Mplus DT FedEx Shipping System Printers Mini-CD from your CD drive.
19. To print a test label, click Start > Settings > Printers and Faxes. The Printers and Faxes screen displays.
20. Right-click Zebra ZP 500 (ZPL) and select Properties. The Zebra ZP 500 (ZPL) Properties screen
displays.
21. Click Print Test Page to print a test label. The test label prints out and the Zebra ZP 500 (ZPL) screen
displays. Click OK to close this screen.
22. Click OK to close the Zebra ZP 500 (ZPL) Properties screen. Close the Printers and Faxes screen.
NOTE: If the test label does not print, repeat the Install ZP 500 Thermal Printer Driver procedure.
23. When you have completed this process, reboot your computer again. The ZP 500 thermal printer driver
is now installed on your system.
6 Now that you have installed the ZP 500 thermal printer driver, follow the
procedure below to complete the setup of your thermal printer driver
with the appropriate FedEx Ship Manager solution.
If you are using FedEx Ship Manager at fedex.com:
1. Log in to FedEx Ship Manager at fedex.com. (Go to fedex.com, place your cursor over the Ship tab and
select Prepare Shipment Online from the drop-down menu. The fedex.com Login screen displays.)
2. Click Preferences at the top of the screen.
To Next Page
Loading...