5.VIEWING/DELETING THE PHOTOS/VIDEOS
26
English
● Record Video: Press “UP/VIDEO” 【▲】 button to switch
to video mode.Press Shot button to start to record a video clip.
Press Shot button again to stop recording.
4.2.Test Camera’s PIR Sensor
Slide the power switch to “TEST”,waving your hand in front
of the camera. The red LED light ashes mean that the front
motion PIR sensor works ne. The blue LED light ashes mean
that the side motion PIR sensor works ne.
5.VIEWING/DELETING THE
PHOTOS/VIDEOS
You have four ways to view photos or videos: Camera LCD, SD
card, External Monitor, "Trailcam Link" APP.
5.1.Review Files on the Camera LCD
● Switch to “TEST” position.
● Press the “REPLAY” button to enter image review mode
● Press the “UP/DOWN”【▲/▼】button to scroll through your
photos or videos.
● A zoom feature is available for still photos: Use the “SHOT”
buttons to zoom in or out. Press UP/DOWN/LEFT/RIGHT
buttons to move to see every single detail.
● Press the OK button to play or pause a video.
5.2.Review Files Directly from the SD Card
♦ Reviewing Images by Connecting to a Computer When using
a PC (or Mac*) to view photos (or video clips*), rst connect
the device to the computer with the USB cable(supplied). It will
be recognized as a 'mass storage'. You can review image sand
To Next Page