Zeegma Gewit - Troubleshooting Common Issues; Scale Activation and Power Problems; Measurement and Calibration Errors

EN
TROUBLESHOOTING
Problem Cause Solution
The scale does not
activate
• No battery.
• Battery inserted
wrongly
• Low battery
• Weight below 5 kg.
• Install battery.
• Remove battery
and insert again,
pay attention to
battery terminals.
• Replace battery.
• Minimum
measured value is
5 kg.
Serious measurement
error
• Scale is not
positionedonat
surface.
• Check selected
measurement unit.
• When measuring
forthersttime,
the scale could
have not calibrated
automatically.
• Scale must be
positioned on
aatandhard
surface. Avoid
carpets and other
soft surfaces.
• Set a proper unit.
• When using for
thersttimeand
every time when
your scale changes
its position,
activate scale by
touching it and
wait about 10
seconds until it
deactivates on its
own. Scale should
show “0.0” at this
time.
The display shows Low battery. Replace battery.
Thedenitionsofallvaluespresentedabovecanbefoundintheapplication.