Need help?Do you have a question about the ZEIA PHANTOM FX-61 and is the answer not in the manual?
User is responsible for safe operation, avoiding damage to self, others, or property.
Product is not a toy and requires adult supervision due to complexity and potential hazards.
Caution regarding Li-Po battery handling, charging, and storage to prevent fire and injury.
Installing fiberglass tube and plastic locker into wing panels.
Gluing the large fiberglass tube onto the fuselage.
Connecting wings to the fuselage and securing them.
Attaching the glass fiber tube and wing panels to the fuselage using glue.
Gluing the servo in the wing and connecting the linkage to the control horn.
Mounting the motor and attaching the foam cover to the fuselage.
Gluing tail fins and attaching canopy lock and stick.
Installing the propeller onto the motor shaft.
Diagram showing connections between ESC, Receiver, and Servos.
Instructions for turning on the transmitter and installing the battery.
Guidance on adjusting and securing control linkages for proper operation.
Testing control surface movement by operating transmitter sticks.
Demonstrates aileron control surface movement based on stick direction.
Demonstrates elevator control surface movement based on stick direction.
Adjusting control surface throw by moving pushrods inward or outward.
Specifies the correct center of gravity measurement for the aircraft.
To Next Page
General