What to do if Zell AC1800 shows 'CODE:02 INNER TANK FILLED'?
If your Zell Service Equipment displays the warning 'CODE:02 INNER TANK FILLED,' it means the internal refrigerant container is full. To resolve this, drain the internal refrigerant container in the proper manner.
What to do if Zell AC1800 shows 'CODE:W08 REFRIGERANT IS NOT ENOUGH'?
If your Zell Service Equipment displays the warning 'CODE:W08 REFRIGERANT IS NOT ENOUGH' during a recharge, it means the quantity of refrigerant is less than 2KG. To fix this, refill the refrigerant into the internal tank.
What to do if Zell Service Equipment shows 'CODE:W01 TANK PRESSURE IS TOO HIGHT'?
If your Zell Service Equipment displays the warning 'CODE:W01 TANK PRESSURE IS TOO HIGHT', it usually occurs during the recovery process. Stop the process and wait for the tank to cool down. Release some gases if necessary.
What to do if Zell AC1800 shows 'CODE:W03 PRESSURE IN SYSTEM RECOVERY START'?
If your Zell Service Equipment displays the warning 'CODE:W03 PRESSURE IN SYSTEM RECOVERY START' during vacuum, it indicates that there is refrigerant in the A/C system. You need to recover the refrigerant first.
What does 'WARNING! CODE :W16 NOT ENOUGH PRESSURE TO RECOVERY!' mean on Zell AC1800 Service Equipment?
The message 'WARNING! CODE :W16 NOT ENOUGH PRESSURE TO RECOVERY!' on your Zell Service Equipment is normal during the recovery process. Press to continue other operations, especially if you are sure there is no refrigerant in the A/C system.
Provides fundamental safety rules and legal compliance requirements for operating the service station.
Highlights specific warnings related to the safe operation and potential hazards of the Air-Con Service Station.
Describes the built-in safety mechanisms designed to protect the user and equipment from potential failures.
Provides step-by-step instructions for physically setting up and powering on the Air-Con Service Station.
Details the procedure for correctly installing the refrigerant oil bottle into the service station.
Describes the procedure for recovering refrigerant from a vehicle's A/C system for recycling.
Details the steps for creating a vacuum in the A/C system and performing a leak test.
General| Brand | Zell |
|---|---|
| Model | AC1800 |
| Category | Service Equipment |
| Language | English |
To Next Page