Zemic Atex - Ec Declaration of Conformity

Atex Load Cell Instruction Manual
Zemic Europe B.V. T: +31 76 50 39480
Leerlooierstraat 8 Nr. 2021.06 Atex Load cell instruction manual Rev5 F: +31 76 50 39481
4871 EN Etten-Leur info@zemic.nl
The Netherlands 10/12 www.zemiceurope.com
Specifications and dimensions are subject to change without notice and do not constitute any liability whatsoever.
EC-Declaration of Conformity
EC-Declaration of conformity of a sub-assembly with ATEX-Directive 94/9/EC
We, the manufacturer,
Zhonghang Electronic Measuring Instruments Co., Ltd. Xibudadao road 166, 710000 Xi’an.
Hereby declare that the load cells described below:
2H3, B3G, H3G, BM3, H3, H3C, H3A, H3E, H3F, H3J, B8D, B8K, BM8D, BM8F, BM8H, H8, H8B, H8C,
H8E, H8K, HM8, HM8C, B6E, B6F, B6G, B6N, B6Q, BM6A, BM6G, H6B, H6E, H6E3, H6F, H6G, H6G5,
B9C, B9D, B9E, B9F, B9H, B9J, B9K, H9B, H9C, H9D, H9N, HM9B, HM9C, HM9E, BM11, HM11,
BM14A, BM14C, BM14D, BM14G4, BM14K, HM14C.
Serial numbers can be found in calibration certificate added to the shipment.
With markings:
and
II 1G Ex ia IIC T4 Ga or
II 1D Ex ia IIIC T
200
135°C Da or
II 3G Ex ic IIC T4 Gc or
II 3D Ex tc IIIC T73°C Dc.
And corresponds to the production model described in the EU type-approval certificate and to the
requirements of the Council Directive 2014/34/EU:
EN60079-0:2018, EN60079-11:2007, EN60079-15:2005, EN60079-26:2007, EN61241-0:2006,
EN61241-11:2006 and EN60529:1991 + A1:2000.
The loadcells mentioned, received a certificate after exam of conformity by notified body 2809 FM
Approvals, Element 78, 1 Georges Quay Plaza, Dublin Ireland. The certificate number:
FM07ATEX0017X – Issue 2.
This declaration is issued under the sole responsibility of the manufacturer.
This document is signed for and on behalf
of:
Zhonghang Electronic Measuring Instruments Co., Ltd.
Place and date of issue:
07-06-2021, Etten-Leur
Name and Function:
Sander Fiere, Technical Manager
Signature: