What to do if my ZEN BRIGHTON sauna does not power up?
If your ZEN Plumbing Product sauna isn't powering up, ensure the power is correctly connected. Check the outlet and circuit breaker. If problems persist, replace the power supply or the related circuitry board.
How to fix ZEN Plumbing Product infrared heater that is not heating up?
If the infrared heater in your ZEN Plumbing Product isn't heating up, you can try the following: * Replace it with a new heater of the same specifications. * Check the connection/junction and replace it if loose or broken. * Replace the circuit board.
What to do if the indicator light for power supply on my ZEN Plumbing Product is not working?
If the indicator light for the power supply on your ZEN Plumbing Product isn't working, check the connector and replace it if it's broken. Also, inspect the circuitry, especially to see if power is being supplied to the input. If necessary, replace the circuitry panel.
Why does my ZEN Plumbing Product sauna have an odor?
An odor coming from your ZEN Plumbing Product sauna might indicate that the temperature has exceeded the high cut-off range, potentially requiring a replacement of the power supply. It could also mean that parts of the circuitry have broken.
What to do if the temperature display on my ZEN BRIGHTON Plumbing Product shows "EP"?
If the temperature display on your ZEN Plumbing Product shows "EP", tighten the connector of the temperature sensor or replace it with a new one.
What to do if the indicator light for function on my ZEN Plumbing Product is not working?
If the indicator light for function on your ZEN Plumbing Product isn't working, you can try replacing the relevant control panel or the circuit board. Also, check to ensure the connection is tight.
What to do if the light bulb in my ZEN Plumbing Product is not working?
If the light bulb in your ZEN Plumbing Product is not working, replace the light bulb. If that doesn't work, replace the lamp holder. Otherwise, repair or replace it.
What to do if the temperature display on my ZEN BRIGHTON Plumbing Product shows "H"?
If the temperature display on your ZEN Plumbing Product shows "H", turn off the unit and contact the manufacturer.
General| Brand | ZEN |
|---|---|
| Model | BRIGHTON |
| Category | Plumbing Product |
| Language | English |
Detailed warnings and precautions for safe sauna use, including hyperthermia risks and supervision.
Guidelines for sauna placement, floor leveling, water avoidance, and storage of flammable materials.
Identifies all components included in the sauna package for installation verification.
Essential checks and advice before starting the sauna, including temperature settings and hydration.
Step-by-step guide on operating the sauna controls for temperature and timer settings.
Key safety warnings during sauna use, such as avoiding heating elements and drying clothes.
Resolves issues with power and function indicator lights, detailing causes and solutions.
Addresses problems like non-heating elements, odors, and burnt-out light bulbs.
Provides solutions for power failures and error codes 'EP' or 'H' on the temperature display.
Instructions for cleaning the sauna interior/exterior, using safe agents, and unplugging the unit.
Advice for safe transport and storage, avoiding dampness and collisions during transit.
Information on activating the product warranty and the process for making claims.
To Next Page