2. Place the bottom board in the desired location of your sauna, and make sure which side is the front and
which side is the back. See FIG-3.
FIG-3 Placing Bottom Panel FIG-4 Assembling Back Panel
3. Align the Back Panel with Bottom Panels corresponding battens; make sure they are on the same line.
One person should hold the back panel while the other person continues the next step. See FIG-4
4. Align the Left Panel with Bottom Panels corresponding battens; make sure the Left Panel fits flush into
the Back
Panel. See FIG-5
FIG-5 Assembling Left Panel FIG-6 Screwing
5. Align the Right Panel with Bottom Panel’s corresponding battens; make sure the Right Panel fits flush
into the Back Panel and screw together. See FIG-6 and FIG-7
5
To Next Page
Loading...