2
3. Safety Guidelines
3.1 Usage
1. Store product in a cool and dry place.
2. Do not dispose of the product in heat or re.
3. Do not expose to moisture or submerge it in liquid.
4. Do not use around strong static electricity or magnetic elds.
5. Do not disassemble the product. Consult ofcial Zendure channels when
service or repair is required. Incorrect disassembly or reassembly may
result in a risk of re or injury to persons.
6. When using the product, please strictly follow the operating environment
temperature range specied in the user manual. If the temperature is
too high, it may result in a re or explosion; if the temperature is too
low, the product performance may be severely reduced, or the product
may cease to work.
7. Do not block or obstruct the fan during use or place the product in an
unventilated or dusty area.
8. Ensure the product is not hit, dropped, or heavily vibrated. Securely
fasten the product when transporting to avoid damage. If severely
damaged, turn off the power source immediately and discontinue using
the product.
9. If you accidentally drop the product into water during use, please place
it in a safe open area, and stay away from it until it is completely dry.
The dried product should not be used again and should be properly
disposed of according to the Disposal Guide section of this manual.
10. Only clean the ports with a dry cloth.
11. Place on a at surface to keep the product from falling over. If the
product is overturned and severely damaged, turn it off immediately,
place the battery in an open area, keep it away from people and
combustibles, and dispose of it in accordance with local laws and
regulations.
12. Keep out of reach of children and pets.
1. When possible, fully discharge the battery before disposing of it. Consult
your local laws on battery recycling and disposal.
2. If the battery cannot be fully discharged due to product failure, contact
a professional battery recycling company for further processing.
3. When disposing of secondary cells or batteries, keep cells or batteries of
different electrochemical systems separate from each other.
ZENDURE TECHNOLOGY CO., LIMITED declares that the SolarFlow product
(Smart PVHub and Add on battery AB1000) complies with directive
2014/53/EU (RED) , 2011/65/EU(RoHS) , 2015/863/EU(RoHS).
The full text of the Declaration of Conformity is available at the following
web address:https.https://zendure.de/pages/garantiebestimmungen
This device complies with Part 15 of the FCC Rules.Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
3.2 Disposal Guide
3.3 EC DECLARATION OF CONFORMITY
3.4 FCC Caution
EN
To Next Page
Loading...
Need help?
General