(12.6V/10A,126W Max)
Car Socket:
12.6V/8A,100.8W(Input)
12.6V/10A,126W(Output)
Using AC, DC, Car, and USB Outputs
Press and hold the button corresponding to the output you would like to use. After
2 seconds, the output’s respective icon will appear on the screen. Press and hold
again for only 2 seconds to turn off the corresponding output.
Charging a Car Battery
Activate the DC outputs, then press the DC button twice. “Car-Start” will appear
on the screen. Connect your SuperBase to the car’s battery. After some time,
“Failed” or “Completed” will appear on the display in indicate whether charging
was successful.
Using the LED Flashlight
Press and hold the “LED” button for 2 seconds to turn on the LED. Press the button
again to change between normal, bright, SOS, and flashing mode. Press and hold
the “LED” button for 2 seconds to turn off the LED.
Quick Shutdown
Press and hold any illuminated button. After a few seconds, all outputs will turn
off.
Conserving Energy
When the AC outputs are active, there will be a 10-20W loss of power. We
recommend turning off the AC outputs when you are not using them.
Changing the AC Output Frequency
With the AC output activated, quickly press the “AC” button three times to toggle
the AC output frequency between 50Hz and 60Hz. The Power Indicator will briefly
display either “F50” or “F60” to indicate the selected frequency.
Transporting This Product
This product must be protected from rain, flooding, collision, and vibration during
transport.
Storage
Do not place this product in a high temperature environment (above 45°C/113°F)
or near a flame.
For long-term storage (more than three months), this device should be kept at or
above 50% charge to maximize the service life of the internal battery.
Please charge and discharge this product twice every six months to maximize the
service life of the internal battery.
Operating Temperature
Please use this product in a temperature range of 0-45°C/32-113°F for safe
operation and maximum service life.