You can control the charging power through the AC Charge Speed Switch. The
Slow Charge/
Custom
Slow Charge/
Custom
input power. In case of unusual situations where the AC input current remains
there is no product failure, you can press the Overload Switch to resume
charging.
Tips:
. Please use the AC Charging Cable in the box. Plug directly into an AC wall
outlet and make sure that the wall outlet and circuit are rated for more than
15A. Otherwise, reduce the unit charging speed via the Zendure App.
Zendure assumes no responsibility for any consequences of product misuse,
including but not limited to charging with an unsuitable wall outlet, circuit, or
power cable.
charging power.
EN
7
To Next Page
Loading...
