load side transfer switch. It's also a fast-charging dock for SuperBase V and
features two EV outlets. A Home Panel can be connected to one or two
SuperBase V units’ ZenT2 Port.
Refer to the user manual of the Home Panel for detailed instructions.
Press the AC Power Button for 3 seconds to connect with Home Panel. Refer to
the latest Zendure App for more information.
Tips:
before connection.
start charging or discharging.
. Do not connect them during charging/discharging process.
. Do not touch the metal pins of the ports with your hands or other objects.
Gently clean them with a dry cloth when necessary.
Zen Y cable can connect two SuperBase V units together for higher output up to
It’s a solution to replace fuel generators.
* It is only available for US version.
* If the Y cable is loose and falls off during use, please turn off the SBV and then
reconnect the Y cable as below step by step .
1. Turn off both SBVs.
2. Connect the communication cable to the communication ports of both SBVs.
4. Turn on the SBVs, and then turn on the AC output of either SBV.
Communication cable:
Schematic diagram:
Zen Y cable
Communication cable
Communication Port
EN
6
To Next Page
Loading...
Need help?
General
