Zenit blue - EU DECLARATION OF CONFORMITY

The manufacturer:
ZENIT ITALIA S.r.l.
Via dell’Industria,11 - 41018 S.Cesario S.P. MODENA - (ITALY)
Declares that the submersible electric pump, series BLUE and BLUEPRO, -Ex versions with marking
Meet the Essential Health and Safety Requirements applicable to them in terms of the directive ATEX 2014/34/UE and IEC Ex scheme.
The following main standards are applied: EN 60079-0:2012+A11:2013, EN 60079-15:2010, EN ISO 80079-36 2016, EN ISO 80079-37: 2016,
IEC 60079-0:2011 , IEC 60079-15:2010 - EN 60034-1:2010-10+EC:2010-10; EN 60335-1:2012-01; IEC 60335-2-41:2012.
The aforesaid equipment has been approved by the following certification procedures:
- Type examination certificate (Volountary request of Directive 2014/34/UE) number EPT 16 ATEX 0228 X and - IEC Ex Certificate of Conformity
(CoC) N° IECEX EUT 16.0006X issued by Eurofins Product Testing Italy s.r.l. via Cuorgnè 21 - 10156 Turin (Italy).
IEC Ex Quality Assessment Report (QAR):
Zenit Italia S.r.l. N° DNV/QAR10.0002/02 performed by DNV - DNV (DNV Nemko Presafe AS)
Zenit pumps (Suzhou) Co., Ltd N° CN/CQM/QAR10.0003/04 performed by CQM - China Quality Mark Certification Group Co., Ltd.
The manufacturer ZENIT ITALIA S.r.l. operates in accordance with Quality Control System procedures which comply with the UNI EN ISO 9001
standard, accredited by DNV with certificate no. CERT-00660-95-AQ-IND-SINCERT
We also declare that the technical file for the electric pump is available at:
Zenit Italia S.r.l.
Via dell’Industria,11 - 41018 S.Cesario s.P. Modena - (ITALIA)
Modena, __________________
EU DECLARATION OF CONFORMITY
Signed
Massimiliano Volta
(Director)
II 3G
Ex nA nC IIC T3 Gc
Ex h IIC T3 Gc
II 3G
Ex nA IIC T3 Gc
Ex h IIC T3 Gc