illustration). The Outer Dial (calibrated from 1/30th to 1/500th sec ) is the shutter speed control and this,
when rotated, is constantly linked to the small 'zero' index in the curved meter-window, (see illustration).
The Inner Dial is the film-speed control (calibrated with ASA and DIN speed ratings and aperture
figures).
LOADING & UNLOADING
Proceed as previously instructed but as the spring-loaded rewind knob is recessed within exposure meter
controls it has first to be brought into operating position by depressing slightly and turning it anti-
clockwise.
(Illustration shows the knob in the rewind position, for loading and final removal of the cassette pull the
knob upwards from this position).
To Next Page
Loading...
