Now fix the leading edge of the film under the take-up spool spring and engage on the spool tooth and
film sprocket. Ensure that the film is guided correctly over the film-channel runners. Replace the
cassette into its seat. Return the rewind wheel to its original position. Close the back cover by pressing
down the lock-catch. Advance the shutter setting lever to the stop position: then press the release button.
As the lever turns, the film is advanced by the space of one shot. To transport non-exposed film to the
film aperture: cock the shutter twice: pressing the release button after each cocking: Note. While
cocking the shutter, check whether the film rewind wheel rotates. If not, check whether the camera is
correctly loaded with film. Finally, turn the exposure-counter dial and set the figure 'O' to align with the
index dot on the ring. Set the exposure counter when the shutter
To Next Page
Loading...
