Zenit EM - Camera Operation Guide; Loading and Setting Up

USING THE CAMERA
• LOADING THE CAMERA
Under subdued daylight, load the camera as follow:
1) Open back of the camera by pushing the latch upwards
(see figure 2).
2) Push down on the rewind knob and turn left, then pull
it out (see figure 3) so that the cassette can be dropped
in the empty film chamber.
3) Push down tne rewind knob and turn right to lock it in
place.
4) Insert film lead in one of the slots of the take-up spool
and give half a turn to the spool (see figure 4).
fig 2
fig 3