To Next PageTo Next Page
Need help?Do you have a question about the Zenitel Vingtor Stentofon SPA-V2 and is the answer not in the manual?
Provides information on document scope, publication log, related documents, and system requirements.
Details SOLAS requirements, class society standards, and tested regulations for the SPA-V2 system.
Covers system description, inspection, planning, environmental, cable, and power supply requirements.
Details cabinet and panel dimensions, cutouts, and mounting specifications for various components.
Illustrates wiring diagrams for connecting various components and provides system configuration examples.
Explains jumper configurations for system functions on terminal boards and additional function boards.
Details input signal and amplifier volume adjustments on terminal boards and specific amplifier models.
Covers loudspeaker power calculation, alarm setup, priorities, relay boards, and tone configurations.
Details specific configurations for Alarms 1 through 15, including timing and activation.
Explains how to activate the FIRE alarm function using jumpers and buttons.
Outlines general notes, mechanical, cable, power, and function configuration checks before use.
Provides a step-by-step guide for system startup and testing after installation.
Explains the use of local mute for preventing feedback and provides a wiring diagram.
Provides an example of custom alarm configuration for a standard 4002 Alarm.
Illustrates various alarm tone patterns including pulse, general, abandon, and manual/fire alarms.
General| Category | Security System |
|---|---|
| Connectivity | Ethernet |
| IP Rating | IP66 |
| Type | Intercom |
| Audio Codec | G.711, G.722 |
| Protocols | SIP |
| Power Supply | PoE (Power over Ethernet) |
| Mounting | Wall Mount |
| Humidity | 10% to 95% non-condensing |
