Zenith ZH210 - Remote Button Functions; Power and Mode Selection; Channel and Volume Controls

Button Functions
Note: The REC button must be pressed TWICE to record from
your VCR. For some brands of VCRs, you might need to press
the REC button once, then press it again for three seconds. Some
buttons on the remote might have functions that are referred to by
different names on the device you are controlling. E.G. PREV.
CHAN may be called RECALL, or ENTER may be called DIS-
PLAY. These differences depend on the brand and model of your
product. Also, this remote can only operate features that exist on
your product. E.G., your product must have PREV.CHAN ability
for the PREV.CHAN button to operate this feature.
3
1.
2.
3.
4.
5.
6.
7.
8.
9.
17.
16.
15.
14.
13.
12.
11.
10.