Zenna Home BBHB75 User Manual

Pg 1 of 10
IS0090-I
©2013 Zenith Products Corp.
MCS 11/5/2013
Before You Begin:
Thank you for purchasing this product. Please identify all parts and hardware pieces before you begin.
When laying out parts, place them on a soft surface to prevent scratching.
Assembly instructions - BBHB75, BBHB75AN (Bronze) / BBN75, BBN75AN (Satin Nickel)

Zenna Home BBHB75 Specifications

General

Brand	Zenna Home
Model	BBHB75
Category	Indoor Furnishing
Language	English

Summary

Before You Begin

Initial Preparation Advice

Important preparatory steps and advice before starting assembly of the product.

Product Identification

Tools Needed

Lists the tools required for assembly, such as a screwdriver and hammer.

List of Parts

Details all physical parts with their respective labels (A, B, C, etc.) for identification during assembly.

Hardware Identification

Hardware Components

Lists and identifies all screw types, end caps, and wall anchors required for assembly.

Main Unit Assembly Steps

Attach Leg Extensions

Connects front and rear leg extensions to the main leg pieces using small screws.

Insert End Caps and Tubes

Installs end caps into leg extensions and inserts front/rear tubes into leg assemblies.

Install Shelves

Fastens two shelves to the leg assemblies, ensuring crosswires are oriented on the bottom.

Attach Top Piece and Top Shelf

Secures the decorative top piece into rear tubes and fastens the top shelf.

Finalize Main Unit Assembly

Inserts end caps into front tubes and top piece, then attaches the bottom brace.

Wall Mounting Instructions

Mount Unit to Wall Safely

Provides critical safety warnings and step-by-step guidance for securely mounting the unit to the wall.

Accessory Assembly Instructions

Assemble Hanger Component

Instructions for sliding the hook body onto hangers and ensuring proper wire alignment.