Need help?Do you have a question about the Zenoah BCZ4000DW and is the answer not in the manual?
Ensure the work area is clear and all safety checks are done before operating.
Step-by-step guide to safely start the brushcutter engine.
Safe procedures for refueling the brushcutter, including fuel type and storage.
Step-by-step guide for securely attaching the cutting blade.
Procedure for fitting the trimmer head assembly to the unit.
How to adjust the unit for proper balance when attached to the harness.
Specifies the correct gasoline to oil ratio for the engine.
Detailed steps for properly mixing fuel and oil.
Safe procedures for filling the fuel tank.
Step-by-step instructions for starting the engine.
Procedure for safely shutting down the engine.
Techniques for effective and safe cutting with the brushcutter.
How to prevent and manage blade thrust for safety.
Instructions for replacing the trimmer line on the spool.
How to inspect and clean the air filter for optimal performance.
Maintenance steps for the spark plug to ensure proper ignition.
How to check and clear the air cooling vent.
Ensure the work area is clear and all safety checks are done before operating.
Step-by-step guide to safely start the brushcutter engine.
Safe procedures for refueling the brushcutter, including fuel type and storage.
Step-by-step guide for securely attaching the cutting blade.
Procedure for fitting the trimmer head assembly to the unit.
How to adjust the unit for proper balance when attached to the harness.
Specifies the correct gasoline to oil ratio for the engine.
Detailed steps for properly mixing fuel and oil.
Safe procedures for filling the fuel tank.
Step-by-step instructions for starting the engine.
Procedure for safely shutting down the engine.
Techniques for effective and safe cutting with the brushcutter.
How to prevent and manage blade thrust for safety.
Instructions for replacing the trimmer line on the spool.
How to inspect and clean the air filter for optimal performance.
Maintenance steps for the spark plug to ensure proper ignition.
How to check and clear the air cooling vent.
General| Engine Type | 2-Stroke |
|---|---|
| Starter System | Recoil |
| Shaft Type | Straight |
| Handle Type | Loop Handle |
| Displacement | 40.2 cc |
To Next Page