20
PRB24F01AG Use, Care, and Installation Guide
BEVERAGE COOLER
SINGLE ZONE
PRESRV™
Installation Instructions
Removing the Glass Shelves
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull out the spacer pins on both sides near the inner side of the layer frame to take out the glass
shelves.
Installing the Anti-tip Bracket
1. Position anti-tip bracket at a minimum of 8” from the left or right of the side of the cooler.
2. Install anti-tip bracket to floor by using supplied 2” screws.
3. Push the cooler back into anti-tip bracket making sure the bracket overlaps the cooler bottom.
8”
To Next Page
Loading...
