To Next Page
P
phillipswilliamAug 4, 2025
Why is my Zephyr Kitchen Appliance not cold enough?
- JJonathon BakerAug 4, 2025
There are several reasons why your Zephyr Kitchen Appliance might not be cooling properly. Check the temperature control setting and adjust it as needed. Ensure the appliance isn't near sunshine or heat sources. Avoid opening the door too frequently or for extended periods, and make sure the door gasket is sealing correctly. Insufficient ventilation or restricted airflow due to overstocking can also be factors. The room temperature also plays a role, so ensure it's within the appropriate range. If the issue persists, there may be a problem with the door gasket seal. In addition, demonstration mode may be enabled, so verify it is disabled.
General
