Zephyr PRW24F02BG User Manual

14
Installation Instructions
Reversing the Door Swing of Your Appliance
Should you desire to reverse the opening direction of the door, please follow the
instructions below. Safely reversing the door swing of your application should require at
least two people.
1. Open the door and using a Phillips screwdriver, remove the bottom screws from
the lower hinge.
2. Pull down to remove the glass door and place it on a padded surface to prevent
scratching it.
3. The door revolves 180 degrees. Remove the door magnet and install it on the
opposite side. Remove the silver plastic cover from the top hinge of the door.
4. Remove the screws from the upper right hinge. Place the upper right hinge in a
safe place in case you need to reverse the door in the future. Remove the
decorative covers from the upper left hinge corner. Install the upper left hinge by
fastening the screws through the left hinge to the cabinet. Insert the decorative
covers to the upper right hinge. Insert the silver plastic cover to the bottom hinge
of the door.
5. Remove the door axis from the lower right hinge. Install the door axis on the
lower left hinge.
6. Carefully insert the door into the upper left hinge, then slide the door on top of
the lower hinge and secure the door by installing the lower screws.

Zephyr PRW24F02BG Specifications

General

Brand	Zephyr
Model	PRW24F02BG
Category	Kitchen Appliances
Language	English