6
4.1 Before First Use
4.2 Installation
4.3 Charging
1. When the low battery is detected, the blue indicator flashes for5times and turns o�.
2. Plug the USB cable to mini connector, connect the other terminal to power adapter and charge
the device. Use the power adapter with rated output DC 5.0 V, 1A.
3. While the device is charging, the green indicator flashes continually.
4. The LED indicator is lit steadily when the battery is fully charged.
5. The appliance can be used during charging process.
1. Remove all packaging from the main device and accessories.
2. Verify if all content is intact.
3. Charge the appliance minimum for 30 min before first use.
Note: Clean, disinfect and dry all parts before installation
4. Instruction for Use
To Next Page
Loading...
Need help?
General