9
8 STEAM CLEANING PRACTICAL ADVICE
WORKING WITH STEAM CLEANING
NOTE:
• At the start of either cleaning or ironing, or after a long period of inactivity,
it is recommended that you spray some steam on a separate cloth to
eliminate any possible water residues from the steam tube.
• For eective cleaning, it is the steam intensity, and not the pressure applied
to the accessory, that is essential.
WARNING!
Furniture surfaces can be cleaned with the steam cleaner in keeping with the
following conditions:
• Do not clean furniture surfaces with the direct steam jet.
• Adjust the steam intensity with the steam regulator (10). Press the button
on the handle of the steam nozzle to release the steam.
• Direct the steam jet towards the surface to be cleaned. Clean the dirty
surface evenly with the oor-polisher. For more stubborn dirt, rub a little
without pressing on the brush.
• Collect the dissolved dirt with a cloth.
• Always use a soft, absorbent cloth.
• Apply little steam pressure.
• Do not apply pressure when cleaning.
RECOMMENDED STEAM INTENSITY LEVEL OF DIRT STEAM INTENSITY
Very light dirt 1-2/6
Light dirt 3-4/6
Stubborn dirt 5-6/6
TUTTOSTEAMY IS AN EFFECTIVE REMEDY AGAINST MITES
Mites are parasites invisible to the naked eye, responsible for bothersome
allergies. They feed on diverse organic remnants, and for this reason their ideal
habitat is amidst the folds of mattresses, blankets, rugs and carpets. Mites live
in large colonies, especially in springtime. Just imagine that in one gram of
dust, you can nd up to 15,000 mites!
To Next Page
Loading...
Need help?
General