JesterML Operating Manual Glossary
56 of 65 73-406-00 Issue 1.0
Preset
The default mode for the JesterML. On the JesterML24, channel faders control
individual channels and can be crossfaded using the A and B Masters. In 2-Preset
mode, the PROGRAM/GO button is inactive. Preset Mode can be expanded to Wide
Mode, when the PROGRAM/GO button functions as a Store button.
Primary Fixture
The LCD above the wheels can only show the output values for one fixture at a time.
This fixture is called the primary fixture. It is indicated by the LED in it’s selection
button flashing when FIXTURES is selected.
Program
A mode of the JesterML, and also a function of the PROGRAM/GO button. Both
refer to storing a scene or chase as either a submaster or a memory.
PSU
Power Supply Unit. The external box of electronics which lowers the supplied power
voltage into the correct voltages for the JesterML.
Q
See Cue
Quad
Quadrilateral, more specifically a rectangle – one of a number of Movement Effects
available on the JesterML for fixtures with Pan & Tilt. The Movement Effect is
selected using the wheels when the appropriate POSITION wheel group is selected.
Ramp Down
A choice of attack for a chase. The intensity channels snap on to their programmed
level, then fade off.
Ramp Up
A choice of attack for a chase. The intensity channels fade up to their programmed
level, then snap off.
Random
A function of chases, whereby the steps are output in a random order. This is useful
for creating flicker flame effects. This is shown on the front panel as a “?”.
Rate
Another name for Speed. How fast a chase is running.
Record
See Program.
Record Options
This menu in Setup allows you to specify the recording mode of the desk and further
options related to tagging.
To Next Page
Loading...