ZeroKey QTM-UAR10 - Connectors; Alerts, Warnings, and Indicators; Button Functionality

8
2021
-
1
2
-
02
Quantum RTLS Universal Device Manual
2.2.4 CONNECTOR(S)
A micro-USB type connector is used to connect to an external AC adapter for charging the battery.
Although possible, it is not recommended to establish a USB connection between the device and a PC
unless directed by a ZeroKey support member.
2.3 ALERTS, WARNINGS, AND INDICATORS
2.3.1 LIGHT ALERT
Upon boot-up, the QTM-UAR10 LED will turn solid white for 1 second, then turn solid red for 1 second
before entering idle state.
Upon boot-up of the QTM-UMR10, the LED will turn solid white for 1 second, then turn solid red for 5
seconds before entering idle state.
COLOUR & PATTERN
MEANING
Blinking green
On,
normal operation
–
idle or positioning
Solid red
Low battery warning
–
running on battery
Charging – connected to power
Solid white
DFU mode
-
receiving firmware update
2.3.2 BUTTON FUNCTIONALITY
FUNCTION
ACTION
Turn on
Tap (<0.5 seconds)
wh
ile
device is off
Reset
Tap (<0.5 seconds) while device is on
Turn off
Hold 2 seconds