To Next PageTo Next Page
Need help?Do you have a question about the Zeta Alarm Systems INFINITY ID2 and is the answer not in the manual?
Details on obtaining full manuals via QR codes on the panel or website download.
Explains how the ID2 system maps device addresses and dip switch settings to zones.
Outlines the fundamental steps for installing the ID2 panel, including mounting and wiring.
Provides specific wiring information for connecting detector bases to the system.
Information on using a smartphone app to assist with setting device dip switches for addressing.
Specifications and guidance for connecting the panel's mains power supply.
Details on the recommended battery types and series connection for backup power.
Step-by-step guide for configuring the panel, including dip switches and labels.
Procedures for testing device triggers, faults, and power supply behavior post-installation.
General| Category | Fire Alarms |
|---|---|
| Type | Addressable Fire Alarm Control Panel |
| Loops | 2 |
| Battery Backup | Yes |
| Event Log | Up to 10, 000 events |
| Standards | EN54-2, EN54-4 |
| Operating Temperature | -5°C to +40°C |
| Input Voltage | 230V AC |
| Battery Type | 2 x 12V 7Ah |
| Communication Ports | RS-485 |
| Display | LCD |
| Outputs | 4 programmable relay outputs |
| Compatibility | Zeta devices |
| System Type | Conventional or Addressable (configurable) |
