PREMIER M PLUS USER MANUAL & MAINTENANCE GUIDE
Approved Document No: GLT.MAN-112 PAGE 2
Issue: 2.3 Author: NRPJ Date: 25/5/2017
CONTENTS
What to do if the Fire Alarm Panel shows an Alarm (Red LED) ....................................... 1
1. FIRE ALARM CONTROL PANEL SAFETY ISSUES ........................................................................ 3
2. THE PURPOSE OF A FIRE ALARM SYSTEM .............................................................................. 3
3. USER RESPONSIBILITIES & MAINTAINENCE OF THE FIRE ALARM SYSTEM, INCLUDING THE FACP &
ITS INTEGRAL PSE ................................................................................................................... 4
4. PANEL INDICATIONS & CONTROLS ........................................................................................ 5
4.1 GENERAL CONTROLS ...................................................................................................... 5
4.2 ACCESSED CONTROL (AVAILABLE TO AUTHORISED USERS ONLY) ........................................ 5
4.3 SUMMARY OF LED COMBINATIONS AND THEIR MEANING ................................................ 6
4.4 CHECKING THE PANELS INDICATION LEDS ........................................................................ 6
5.1 HOW THE PREMIER M PLUS INDICATES AN ALARM ........................................................... 7
5.2 TO TURN OFF THE ALARM SOUNDERS ............................................................................. 7
5.3 A SECOND ALARM SIGNAL FROM A NEW DETECTION ZONE ............................................... 7
5.4 TURNING ON THE ALARM SOUNDERS FROM THE FACP (I.E. TO EVACUATE THE BUILDING). .. 7
5.5 RESETTING THE PANEL ................................................................................................... 7
6. THE FAULT CONDITION ........................................................................................................ 9
6.1 DIFFERENT TYPES OF FAULT............................................................................................ 9
6.2 WHAT TO DO IF A FAULT CONDITION OCCURS ............................................................... 10
7. DISABLEMENTS ................................................................................................................. 11
7.1 REASONS FOR DISABLING CERTAIN PARTS OF A FIRE ALARM SYSTEM. .............................. 11
7.2 TO DISABLE A ZONE AND/OR EXTERNAL SOUNDERS. ...................................................... 11
7.3 TO ENABLE A ZONE AND/OR EXTERNAL SOUNDERS. ....................................................... 11
8. USING SOUNDER DELAYS ................................................................................................... 12
8.1 WHAT IS A SOUNDER DELAY ......................................................................................... 12
8.2 SOUNDER DELAY SETTING ............................................................................................ 12
8.3 HOW THE PANEL INDICATES SOUNDER DELAY ................................................................ 12
8.4 A FIRE ALARM CONDITION ON A DELAYED PANEL ........................................................... 12
8.5 OVERRIDING A DELAY IN THE EVENT OF A GENUINE FIRE ALARM ..................................... 12
8.6 RESET THE SYSTEM IN THE EVENT OF A FALSE ALARM ..................................................... 12
8.7 TO TURN OFF THE SOUNDER DELAY .............................................................................. 12
To Next Page
Loading...
