Need help?Do you have a question about the Zetronix NEPTUNE and is the answer not in the manual?
General| Night Vision | Yes |
|---|---|
| Two-Way Audio | Yes |
| Motion Detection | Yes |
| MicroSD Card Support | Up to 128GB |
| Storage | MicroSD card up to 128GB |
| Weather Resistance Rating | IP66 |
| Operating Temperature | -20°C to 50°C |
| Connectivity Options | Wi-Fi, Ethernet |
| Resolution | 1080p Full HD |
Charge the camera using the USB cable and AC charger. The blue light indicates charging status.
Insert a Micro SD card into the camera device, ensuring correct orientation for recording video files.
Place the camera device in the bottle's depression and secure it with a label, aligning the lens for operation.
Press and hold the Function Button for 3 seconds to turn the camera on/off. The blue light indicates status.
Quickly press the Function Button to start/pause recording. The blue light flashes to indicate recording.
Connect the camera to your computer via USB to access recorded videos. VLC Player is recommended for playback.
Download the zUtility App from Zetronix to adjust or remove the video date/time watermark.
Formatting erases recorded media and fixes file corruption. Refer to specific pages for detailed instructions.
Use a paperclip to press and hold the pinhole switch for 10 seconds to reset the camera to its default state.
Connect to PC, locate the drive, right-click, select Format, choose FAT32, and start the process.
Use Disk Utility on Mac, select the drive, click Erase, choose MS-DOS (FAT) format, and confirm.
To Next Page
