EasyManuals Logo

ZETTLER P80SB User Manual

ZETTLER P80SB
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1/6 Doc. version 1.0
Visual Indicator Sounder Beacon Series
Summary of the range
Performance characteristics
The Visual Indicating Device (VID) Sounder Beacons and Sounders are
loop powered units that are driven from an addressable controller
panel.They are available in ceiling and wall mounted variants, including an
outdoor wall version.
The ceiling mounted variants provide a base for fitting a fire detector.
Alternatively, a blanking cap is fitted.
The beacons are not EN54-23 compliant and are not suitable for
applications that require a VAD (Visual Alarm Device).
All VID Sounder Beacons and Sounders have a built-in two port loop short
circuit isolator.
Settings for tones, volume, beacon flash and status monitoring are
configurable using the control panel.
Selectable flash rates are:
1Hz (one flash every second)
0.5Hz (one flash every two seconds)
Product Details
Order number
In scope/fitted
Base variant
P80SB Addressable Base Sounder 576.080.002
P80AIB Addressable Base Sounder Beacon VID 576.080.010
Wall variant
P80SW Addressable Wall Sounder White 576.080.003
P80SR Addressable Wall Sounder Red 576.080.004
P85SR Addressable Wall Sounder Weatherproof 576.080.005
P80AIW Addressable Wall Sounder Beacon VID White 576.080.011
P80AIR Addressable Wall Sounder Beacon VID Red 576.080.012
P85AIR Addressable Wall Sounder Beacon VID Weatherproof 576.080.013
Accessories
B-CAP Blanking Cap For Sounder/VID/VAD Bases 557.080.001
A-CON Conduit Adaptor For Sounder/VID/VAD Bases 557.080.002
S-BOXR Shallow Surface Back Box For Indoor Wall Sounder/VAD/VID Red 557.080.007
S-BOXW Shallow Surface Back Box For Indoor Wall Sounder/VAD/VID White 557.080.008
A-BOX Flush Backbox Adaptor For Indoor Wall Sounder/VAD/VID 557.080.010
D-BOXR Deep Surface Back Box for Indoor Wall Sounder/VAD/ VID Red 557.080.011
D-BOXW Deep Surface Back Box for Indoor Wall Sounder/VAD/ VID White 557.080.012
P80SB P80AIB P80SW P80SR P85SR P80AIW P80AIR P85AIR
Mounting orientation
Ceiling Wall
Indoor type A/outdoor type B
Indoor Outdoor Indoor Outdoor
Weight (g)
146 154 182 182 358 194 194 372
Housing material
PC-ABS PC PC-ABS
Housing colour
White Clear White Red White Red
Operating temperature (°C)
-25 to +70 -10 to 55 -25 to +70 -10 to 55 -25 to +70
Storage temperature (°C)
-25 to +70
Humidity
Up to 95% non-condensing
Pressure
Sounder SPL output quoted for 1000 mBar
Sounder volume settings
4 2
EN54-17 isolator
Yes
EN54-3 sounder
Yes
Visual indicator
No Yes No Yes
Vibration, shock, corrosion, EMC
Complies with EN54 series requirements
Beacon flash rates
- 0.5 and 1 Hz - - - 0.5 and 1 Hz
Ingress protection
IP21C IP55 IP21C IP55
Sounder output at 1 metre
High volume
90 dBA 100 dBA
Mid High volume
80 dBA -
Mid Low volume
70 dBA -
Low volume
60 dBA* 90 dBA
Flash colour
- Red - Red
*Not EN54-3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZETTLER P80SB and is the answer not in the manual?

ZETTLER P80SB Specifications

General IconGeneral
BrandZETTLER
ModelP80SB
CategorySecurity Sensors
LanguageEnglish

Related product manuals