9
Manuale d’uso ZF 4-1 M / ZF 30 M
8.1 Dati tecnici
«A» POS = continuous running position (normally AHEAD).
«B» POS = reverse position.
B/W = Borg Warner adaptor.
Note = For all «M» (Mechanical) transmissions reduce power capacity by the following shock factors: 1 cylinder engine ÷ 1.25, 2 cylinder engine ÷ 1.20, 3 cylinder engine ÷ 1.15.
MODEL RATIO POWER / RPM INPUT POWER CAPACITY MAX WEIGHT BELL HSGS.
«A» Pos «B»Pos kW hp kW hp kW hp kW hp RPM kg lb AND NOTES
2800 rpm 3000 rpm 3600 rpm
ZF 12 M 2.136 1.955 0.0131 0.0176 37 49 39 53 47 63 5000 13 29 SAE 4, 5, 6, B/W, Yanmar JH
2.632 1.955 0.0111 0.0149 31 42 33 45 40 54 5000 Max input power 55 kW
K = 1.25 to be applied, if engine has 1 cylinder / K = 1.20 for 2 cylinders / K = 1.15 for 3 cylinders
K = 1.25 to be applied, if engine has 1 cylinder / K = 1.20 for 2 cylinders / K = 1.15 for 3 cylinders
** Max. 120 Nm (88.5 ft lb) admissible for main travelling direction with gear lever set to «B»
MODEL RATIO POWER / RPM INPUT POWER CAPACITY MAX WEIGHT BELL HSGS.
«A» Pos «B»Pos kW hp kW hp kW hp kW hp RPM kg lb AND NOTES
3000 rpm 3600 rpm 3800 rpm
ZF 15 M 1.556 1.955 0.0152 0.0204 46 61 55 73 55 74 5000 13 29 SAE 4, 5, 6, B/W, Yanmar JH
1.875 1.955 Max input power 55 kW.
Ratio 1.556 «B» Pos.
max torque 120 Nm.
Ratio 1.875 «B» Pos.
max torque 120 Nm.
K = 1.25 to be applied, if engine has 1 cylinder / K = 1.20 for 2 cylinders / K = 1.15 for 3 cylinders
** Max. 95 Nm (70 ft lb) admissible for main travelling direction with gear lever set to «B»
MODEL RATIO POWER / RPM INPUT POWER CAPACITY MAX WEIGHT BELL HSGS.
«A» Pos «B»Pos kW hp kW hp kW hp kW hp RPM kg lb AND NOTES
2800 rpm 3000 rpm 3600 rpm
ZF 6 M 2.045 1.864 0.0066 0.0088 18 25 20 27 20 27 5000 10.3 23 SAE 4, 5, 6, B/W
2.722 2.150 0.0047 0.0063 13 18 14 19 17 23 5000 Max input power 20 kW
K = 1.25 to be applied, if engine has 1 cylinder / K = 1.20 for 2 cylinders / K = 1.15 for 3 cylinders
Technical Data for Pleasure Craft Duty
Based on engine power B to DIN 6270; shock factor
K = 1.25 to be applied, if engine has 1 cylinder / K = 1.20 for 2 cylinders / K = 1.15 for 3 cylinders
MODEL RATIO POWER / RPM INPUT POWER CAPACITY MAX WEIGHT BELL HSGS.
«A» Pos «B»Pos kW hp kW hp kW hp kW hp RPM kg lb AND NOTES
2800 rpm 3000 rpm 3600 rpm
ZF 5 M 2.045 1.864 0.0066 0.0088 18 25 20 27 20 27 5000 8.5 19 SAE 6, B/W
2.722 2.150 0.0047 0.0063 13 18 14 19 17 23 5000 Max input power 20 kW
MODEL RATIO POWER / RPM INPUT POWER CAPACITY MAX WEIGHT BELL HSGS.
«A» Pos «B»Pos kW hp kW hp kW hp kW hp RPM kg lb AND NOTES
2800 rpm 3000 rpm 3600 rpm
ZF 10 M 1.482 1.864 0.0109 0.0146 30 41 33 44 38 51 5000 10.3 23 SAE 4, 5, 6, B/W
1.792 1.864 Max input power 38 kW.
2.045 1.864 0.0095 0.0128 27 36 29 38 34 46 5000 Ratio 1.482 «B» Pos.
2.722 2.150 0.0068 0.0091 19 26 20 27 25 33 5000 max torque 95 Nm. Ratio
1.792 «B» Pos. max
torque 95 Nm.
To Next Page
Loading...
Need help?
General
