EasyManua.ls Logo

ZIBRO CLIMA D4 - Specifications

ZIBRO CLIMA D4
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
23
D REMOVABLE WATER TANK
When the water tank is full, with approximately 1 litre of water collected, the unit
will be switched off automatically and the “Yellow” LED (3) will be on [as
Fig.4].
To remove the water tank, first switch off the Zibro Clima Dehumidifier, press
button (1) to the ‘off’ position.
Then, remove the water tank from the unit and pour the water out to the
toilet or bathroom. Put the water tank back into the unit.
To continue dehumidifying, press the button (1) to position again.
E CLEANING
Before cleaning the unit, turn off the Zibro Clima and unplug the AC plug from
the main socket first. Use a piece of soft cloth to clean the surface of the product
or use a brush to wipe the dust off the grills of the air inlet (4).
F SPECIFICATIONS
To be used as indication, subject to modifications
D4
Mains (adapter) Vac / Hz 220-240 / 50
Power consumption W 65
Power dehumidifier Vdc / A 13 / 5
Dehumidification at 32º, 80% RH Ltr/24hr 0.7
Air delivery max.
m
3
/hr
25
Fan speeds 1
Operating temperature ºC 15-32
Water container capacity Ltr 1
Cooling element
Thermo-electric
Peltier module
Noise level dB <48
Dimensions (b x d x h) mm 168x295x160
Weight kg 2.5
Approval a
Model
3
2
1
Fig. 4