Zibro Stover SRE 702 injection (Type B)

Need help?

Do you have a question about the Zibro Stover SRE 702 injection (Type B) and is the answer not in the manual?

Summary

Burning System and Specifications

Kerosene Heater Burning Process

Technical Specifications Overview

How to Use the Heater

Operation Controls

Details the function of Power, Timer, Save, Key-Lock, and Setting buttons.

Error Messages and Troubleshooting

Model-Specific Error Codes (E-X)

Lists error codes E-0 to E-9 with their causes and troubleshooting steps.

System Error Codes (F-X)

Details error codes F-0 and F-1 related to power and thermistor issues.

Overhauling Procedures

Panel and Cabinet Disassembly

Steps for disassembling the front panel and cabinet.

Burner System Component Removal

Instructions for removing burner mat, igniter, and burner ring.

Fuel System and Motor Component Removal

Procedures for removing fuel pipe, pump, and blower motor.

Sensor Component Removal

Steps for removing flame rod, thermistor, and tip-over switch.

Adjusting and Maintenance

Main Circuit Board Connections

Igniter and Thermistor Maintenance

Fuel Pump and Transformer Checks

Air Flow Damper and Burner Assembly

Timing Charts Analysis

SRE 156, 166, 176 Timing Charts

SRE 250 Timing Charts

SRE 260 Timing Charts

Inspection and Repair Guide

E-0 to E-9 Error Displays

Troubleshooting guide for error codes E-0 through E-9.

F-0 and F-1 Error Displays

Troubleshooting for error codes F-0 and F-1.

E-2, E-5, E-6 Error Displays

Troubleshooting for error codes E-2, E-5, and E-6.

E-7, E-8, E-9 Error Displays

Troubleshooting for error codes E-7, E-8, and E-9.

Troubleshooting Other Phenomena

No Operation Lamp Light

Flame Current Display Function

How to Display Flame Current

Calculating Flame Current